Filter
Top Products
70
Timer operation
Preparation section
Basic section
Application section
Knowledge section
Contents
Listening to an AUX input source
A CD player with an analog or optical digital output, MD recorder, cassette deck or a similar component can be
connected to the system as the auxiliary input source.
Connect the component as described in “Connection of Other Accessories”9.
Listening to an Analog equipment Listening to a Digital equipment
1Press the AUX key.
2Play the connected equipment.
AUX
VOLUME
6
MD
VOLUME
3Ajust the volume.
4 Ajust the volume.
1 Press the MD 6 key.
÷ If a MD has already been loaded, it starts to play now.
Press the 7 STOP key to stop it.
2 Set the MONITOR mode to “ON”. ›
menu
/demo
volume/
multi-control
set
Adjusting the input level of the auxiliary source
1Press the menu/demo key.
2Rotate the volume/multi-control knob to se-
lect “AUX D. LEVEL ?” or “AUX A. LEVEL ?”,
then press the set key.
3 Adjust to the desired input level using the
volume/multi-control knob.
4 Press the set key
AUX D LEVEL
........
-∞~+12 dB
AUX A LEVEL
........
-4~+3
Note
Note
Note
When the input level is adjusted, the level of recording
of the signals from the auxiliary input source connected
to the AUX (TAPE/MD) input jacks and optical digital
input jack also changes.
3 Play the connected equipment.