Filter
Top Products
Recording on MD
35
Knowledge section
Preparation section
Application section
Basic section
Contents
The level for recording the digital input signal from an aux-
iliary source component such as a satellite tuner or MD re-
corder can be adjusted.
Blinks
Adjusting the recording level of digital input from the auxiliary source (AUX D. LEVEL)
1 Select the “MD” input. £
2 Set the MONITOR mode to “ON”. ›
3 Press the menu/demo key
4 Rotate the volume/multi-control knob to select “AUX
D. LEVEL ?”, then press the set key.
5 Press the display key to display the level meter. $
6 Adjust the recording level (-∞ ~ +12) by rotating the
volume/multi-control knob.
7 Press the set key to set the selection.
AUX D.LEVEL
?
dB
AUX D.LEVEL
-12dBd
B
TONE
A.P.S.
12:30PM
OPT L
R
AUX
A.
LEVEL
?
A
UX
A.L
EVEL
+3
A.P.S.
12:30PM
L
R
R
L
The level for recording the analog input signal from an aux-
iliary source component such as cassette deck can be ad-
justed.
Blinks
Adjusting the recording level of analog input from the auxiliary source (AUX A. LEVEL)
1 Select the recording input signal (REC INPUT) as required.
›
Level value
Level value
Adjust so that these
segments light at times.
Adjust so that these
segments light at times.
2 Press the menu/demo key.
3 Rotate the volume/multi-control knob to select
“MONITOR ?”, then press the set key.
4 Select “ON” by rotating the volume/multi-con-
trol knob, then press the set key.
5 Press the menu/demo key
6 Rotate the volume/multi-control knob to select
“AUX A. LEVEL ?”, then press the set key.
7 Press the display key to display the level meter.
$
8 Adjust the recording level (-4 ~ +3) by rotating the
volume/multi-control knob.
9 Press the set key to set the selection.