Filter
Top Products
Hearing sound
19
Knowledge section
Preparation section
Application section
Basic section
Contents
Muting the sound temporarily (MUTE)
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is adjusted.
Bass and treble compensation
(N.B.: Natural Bass circuit)
Each press switch the modes as follows.
“S.DIRECT”... The source signal from a CD or MD
can be reproduced with high fidel-
ity to the original sound by bypass-
ing the tone control circuitry in the
main unit.
“TONE” ......... The source signal is processed by
the tone control circuitry before be-
ing output from the main unit.
“N.B.1” .......... Only the lowest frequencies are en-
hanced.
“N.B.2”.......... The lowest and highest frequen-
cies are enhanced according to the
current volume level.
Blinks
Lights
2 Adjust the volume with the volume/multi-control
knob.
÷ Headphones with a stereo mini plug can be connected.
÷ The sounds from all speakers are cut off.
Listening through headphones
1 Insert the headphone plug into the phones jack.
phones
Remote control unit only
Balance adjustment
The responses of the lowest frequencies (BASS) and
highest frequencies (TREBLE) can be adjusted as de-
sired.
After this adjustment, the N.B. effect will be disabled.
Tone adjustment (Remote control unit only)
MUTE
SOUND
VOLUME
TRACK
TONE
MUTE
A.P.S.
12:30PM
T
ONE
C
ONTROL
0BASS 0
TONE
T
ONE
C
ONTROL
0TREBLE
0
+4
TONE
S
OUND
0
C
ONTROL
S.DIRECT
S.DIRECT
A.P.S.
12:30PM
TONE
BALANCE
00000
?
B
ALANCE
L
---+---
R
TONE
\
\
TONE
The balance of volumes from the left and right
speakers can be adjusted as follows.
÷ This adjustment is not available when “S.DIRECT” is
selected.
Blinks
1 Press the TONE key to select ”BASS”.
Adjust the level of lowest frequencies as desired
using the VOLUME keys.
2 Press the TONE key again while “BASS” is dis-
played to select “TREBLE”. Adjust the level of
the highest frequencies using the VOLUME keys.
÷ The BASS and TREBLE can be adjusted independ-
ently in the range from –4 to +4.
1 Press the menu/demo key.
2 Rotate the volume/multi-control knob to select
“BALANCE ?”, then press the set key.
3 Adjust the left and right speaker balance by rotat-
ing the volume/multi-control knob.
4 Press the set key.
3 Press the TONE key once more.