Filter
Top Products
Filename [TH-R1R3EU_10Subsidiary.fm]
Masterpage:Left0
Page 89Monday, 28 March 2005 21:23
89
ON-SCREEN MESSAGE
On-screen Message
● A disc that is not registered in the library has been inserted.
Register the disc as necessary. (A pg. 63)
● Appears when a title that has been selected in the library is not
contained in the loaded disc.
● Recording and/or editing cannot be performed.
● The number of titles exceeds 99.
● The number of play lists exceeds 99.
● To set the timer programme, the clock must be set in advance.
(A pg. 82)
● You can programme this unit to timer record as many as
8 programmes. To programme more, you need to cancel a timer
programme already set. (A pg. 53)
● When a playback-only disc or a finalised disc is loaded, R has
been pressed. (A pg. 2)
● A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (A pg. 3)
● When an incompatible disc is loaded, I has been pressed.
(A pg. 2)
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (A pg. 6, 83)
● During Live Memory playback, o has been pressed. (A pg. 32)
● Timer recording has finished during Live Memory playback.
● Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible.
● The unit has detected invalid contents at the start or in the middle
of playback.
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (A pg. 65)
● The memory for registration for the Navigation system is full. The
recording cannot be started even though the capacity for the
recording is enough.
● The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
● On-Disc Timer Programming has been attempted when a disc
that is not compatible with the function is loaded.
● On-Disc Timer Programming has been attempted when a disc is
not loaded, or loaded upside down.
● An invalid SHOWVIEW number has been input.
● To set the timer programme using the SHOWVIEW system, the
Guide Programme Number must be set in advance.
● Appears when you tried to input a SHOWVIEW number during
timer recording or instant timer recording.
● Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry.
● Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry.
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
INSERT DISC #XXXX
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
SET CLOCK BEFORE TIMER PROGRAMMING
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
REGION CODE ERROR CHECK DISC
UNREADABLE DISC
CHECK DISC
COULD NOT FORMAT THE DISC
CHECK THE DISC
PRESS [STOP] AGAIN TO STOP RECORDING
TIMER RECORDING COMPLETED
PLAYBACK WILL STOP THEN TIMER RECORDING
WILL START
COPY PROHIBITED
CAN NOT RECORD
COPY PROHIBITED
CAN NOT PLAY
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS
NOT RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED
PROPERLY AND POWERED ON
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE
LIBRARY
IF YOU DELETE UNNECESSARY TITLE
INFORMATION,YOU CAN THEN REGISTER
ADDITIONAL INFORMATION
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE TO
REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE
INFORMATION,YOU CAN THEN REGISTER
ADDITIONAL INFORMATION
CAN NOT SET DISC TIMER PROGRAMMING WITH
THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED
BELOW
DVD-RAM
DVD-RW (VR MODE)
NO DISC INSERTED
SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
GUIDE PROGRAMME IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
CAN NOT SET SHOWVIEW TIMER PROGRAMMING
DURING TIMER RECORDING OR INSTANT TIMER
RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER
RECORDING, THEN ENTER THE SHOWVIEW CODE
AGAIN
COULD NOT FINALISE THE DISC
CHECK THE DISC
COULD NOT CANCEL DISC FINALISATION
CHECK THE DISC
TH-R1R3EU_00.book Page 89 Monday, March 28, 2005 9:23 PM