Filter
Top Products
INITIAL SETTINGS
Page 23Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_05Name.fm]
Masterpage:Left+
23
There is a time limit when performing the following setting. If the
time is up before completing the setting, re-perform from the
beginning.
Setting The Speaker Distance
● This operation is not necessary if the Smart Surround Setup is
successful.
● By setting the distance, the unit automatically sets the delay time
of each speaker such that sound from each speaker can be
heard at the same time.
1 Press SETTING.
The item of the setting performed most recently is displayed on
the front display panel.
2 Press F or G to display the speaker setting on the front display
panel.
3 Press selection keys to select the distance.
Each time you press D or E, the speaker distance changes
from 0.3 m to 9.0 m in 0.3 m interval.
4 Repeat steps 2 - 3 as necessary.
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
DVD
(FGDE)
ENTER
SETTING
Selection Keys
Speaker
distance
Changes in the order of
FRNT LNFRNT RNCENTER
NSURR LNSURR R.
CENTRE
FRNT L
FRNT R
SURR L
SURR R
Set the distance as follows for the above case:
● Front speaker 3.0 m
● Centre speaker 3.0 m
● Surround speaker 2.7 m
2.1m
2.4m
2.7m
3.0m
3.3m
TH-R1R3EU_00.book Page 23 Monday, March 28, 2005 9:23 PM