Filter
Top Products
Masterpage:Right+
Filename [TH-R1R3EU_10Subsidiary.fm]
Page 72Monday, 28 March 2005 21:23
SYSTEM CONNECTIONS
72
Remote Control 1/2/3/4 Code Switching
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of the four
codes (1, 2, 3 or 4). The remote control is preset to send code 3
signals because your unit is initially set to respond to code 3
signals. You can easily modify your unit to respond to code 1, 2 or
4 signals.
● Keep pressing SET UP down during step 1.
1 Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4 to
change the remote control code, then press ENTER.
2 Press A on the unit to turn off the unit.
3 Press I on the unit for over 5 seconds while the unit is turned
off. The code currently set appears on the front display panel.
4 Press o on the remote control to change the unit’s code. The
code currently set on the remote control blinks on the front
display panel for approximately 5 seconds, and is applied to the
unit.
Your Remote can operate the basic functions of your TV set. In
addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
IMPORTANT:
Although the supplied Remote unit is compatible with JVC televi-
sions, as well as many other models, it may not work with your TV,
or in some instances, may have limited function capability.
8 Set the TV brand code.
1 Keep pressing SET UP down during step 2.
2 Enter your TV’s brand code using the number keys, then press
ENTER. (A pg. 73)
3 Press TVA on the unit’s Remote to turn on the TV and try
operations.
● Once you have set the Remote to operate the TV, you do not
have to repeat this step until you replace your Remote’s
batteries.
● Some brands of TVs have more than one code. If the TV does
not function with one code, try entering another.
8 Operate the TV.
1 Press the corresponding button: TVA, TV/VIDEO, PR +/–,
VOL +/–, number keys.
● For some brands of TVs, you must press ENTER after having
pressed the number keys.
Remote Control Functions
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
(FGDE)
ENTER
o
SET UP
1-4
Selection Keys
IB/C
TV Multi-Brand Remote Control
● Slide the AUDIO/TV/SAT switch to TV.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
0-9
ENTER
PR +/
-
SET UP
VOL +/–
TV/VIDEO
TV A
TH-R1R3EU_00.book Page 72 Monday, March 28, 2005 9:23 PM