Filter
Top Products
SUBSIDIARY SETTINGS
Page 75Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_10Subsidiary.fm]
Masterpage:Left+
75
RECORDING SET
8 SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to AEdit Library
InformationB (A pg. 63).
8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to ALINEAR PCMB, you can obtain
a high-quality audio sound.
DOLBY DIGITAL:
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
8 AUDIO REC ^ NICAM1/MAIN / NICAM2/SUB / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM1/MAIN:
To record the main language of NICAM audio.
NICAM2/SUB:
To record the sub language of NICAM audio.
MONO:
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 DIRECT REC ^ OFF / ON
When this function is set to AONB, you can easily start recording the
programme that you are watching on your TV. While holding R,
press I on the remote control, or press R on the unit.
NOTES:
● When you use the Direct Rec function, be sure to use a TV
offering T-V LINK, etc. and connect a fully-wired 21-pin SCART
cable between the unit and the TV. (A pg. 11)
● If ADIRECT RECB is set to AOFFB, the R button functions as
described in ABasic RecordingB (A pg. 39).
● During Direct Rec, A- -B appears on the front display panel.
● If a programme is recorded with the Direct Rec, the station name
will not be registered in the library. A- - - -B will be displayed for the
station name.
8 INPUT COLOUR SYSTEM ^ AUTO / PAL / SECAM
You can play back PAL discs, or record PAL and SECAM signals on
this unit. Select the appropriate colour system.
AUTO:
Normally select AAUTOB. AAUTOB identifies the input signal and
automatically switches to an appropriate colour system. When
AAUTOB is not selected, you have to switch the colour system to
an appropriate setting (PAL or SECAM) manually.
PAL:
To record PAL signals.
SECAM:
To record SECAM signals.
DISPLAY SET
8 SUPERIMPOSE ^ OFF / AUTO
When this function is set to AAUTOB, various operational indicators
appear on the TV screen.
OFF:
To turn off superimposed indications.
AUTO:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
NOTES:
● Even when ASUPERIMPOSEB is set to AOFFB, you can display
the various operational indicators by pressing ON SCREEN on
the remote control. To clear the operational indicators, press
ON SCREEN again.
● When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 68)
● When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8 GREY BACK ^ OFF / ON
OFF:
Select this when you want to receive an unstable channel with
poor signals.
ON:
When this function is set to AONB, the TV screen becomes all
grey when receiving a channel not in use.
8 DIMMER ^ BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT:
Normally select this. To turn on the display and blue lamp of the
front display panel.
DIMMED1/DIMMED2:
To change the brightness level.
OFF:
To turn off the display and blue lamp of the front display panel.
8 POWER SAVE ^ OFF / ON
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode ^
^ the front display panel will be turned off.
● It takes some time for the unit to complete initialisation after you
turn on the unit power, with AHELLOB blinking on the front display
panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in
10 different languages. Although AAuto Set UpB (A pg. 17) selects
the language automatically, you can change the language setting
manually as required. (A pg. 20)
● For details, refer to AOn-screen Language SetB (A pg. 20).
TH-R1R3EU_00.book Page 75 Monday, March 28, 2005 9:23 PM