Filter
Top Products
Masterpage:Right+
Filename [TH-R1R3EU_10Subsidiary.fm]
Page 78Monday, 28 March 2005 21:23
SUBSIDIARY SETTINGS
78
Guide Programme Number Set
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
ENTER for confirmation.
3 Press selection keys
to select AGUIDE PRB,
then press ENTER for
confirmation.
4 Press selection keys
to select AGUIDE
PROGRAMMEB, then
press ENTER for
confirmation.
5 Press selection keys
to select the Guide
Programme number
for the desired station
as shown in the TV
listings. Then press
ENTER.
● To change the Guide Programme number in 10 programme
increments, press and hold FG.
6 Press selection keys to select ATV PROGRAMMEB, then press
ENTER. Press selection keys to select the number of the unit’s
channel position on which the Guide Programme number’s
broadcast is received by the unit. Then press ENTER.
● Repeat steps 5 - 6 as necessary.
7 Press SET UP to complete the setting.
SHOWVIEW System Setup
IMPORTANT:
Normally, Auto Set Up (A pg. 17), Preset Download (A pg. 18)
or Auto Channel Set (A pg. 79) sets the Guide Programme
numbers automatically. You need to set the Guide Programme
numbers manually only in the following cases.
● When timer programming with the SHOWVIEW system, the
channel position, where the station you wish to record is
received on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download
or Auto Channel Set has taken place,
^ Set the Guide Programme number for that station manually.
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
RETURN
SET UP
(FGDE)
ENTER
DVD
Selection Keys
Guide Programme Number
AGuide Programme (GUIDE PROGRAMME) numberB refers to
the assigned TV station numbers, according to broadcast area,
for the S
HOWVIEW timer recording. The Guide Programme
Numbers can be found in most TV listings.
1
F-1
DVD SET UP FUNCTION SET UP
GUIDE PROGRAMME
AUTO CH SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
TV PROGRAMME
INITIAL SET UP
MANUAL CH SET
GUIDE PR CLOCK SET
OK
SELECT
SET UP
EXIT
1
F-1
DVD SET UP FUNCTION SET UP
GUIDE PROGRAMME
AUTO CH SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
TV PROGRAMME
INITIAL SET UP
MANUAL CH SET
GUIDE PR CLOCK SET
1
OK
SELECT
SET UP
EXIT
TH-R1R3EU_00.book Page 78 Monday, March 28, 2005 9:23 PM