Filter
Top Products
Masterpage:Right0
Filename [TH-R1R3EU_10Subsidiary.fm]
Page 74Monday, 28 March 2005 21:23
74
SUBSIDIARY SETTINGS
Various modes of this unit are categorised into menus nested in
2 levels shown in the following table. To change the settings of
these modes, find the desired mode in the menu, then follow the
procedure below. (For details on each menu, see pages 74 - 76)
● The procedure below shows how to set the desired option of the
AAUDIO RECB mode as an example.
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AFUNCTION SET UPB, then
press ENTER.
3 Press selection keys to
select ARECORDING
SETB, then press
ENTER.
4 Press selection keys to
select AAUDIO RECB,
then press ENTER.
5 Press selection keys to
select the desired
setting, then press
ENTER.
6 Press SET UP to complete the setting.
*The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the
connected A/V equipment. This function takes effect when a
DVD VIDEO disc is played back.
STEREO:
Select this when listening to conventional two-channel stereo
audio with the unit’s [AUDIO OUTPUT] and [L-1 INPUT/
OUTPUT] connectors connected to a stereo amplifier/receiver
or TV set, or in case you want to record the audio from a
DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND:
Select this when listening to audio with the unit’s [AUDIO
OUTPUT] and [L-1 INPUT/OUTPUT] connectors connected to
an amplifier/receiver with a built-in surround decoder or a
surround decoder.
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a
programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL:
Normally select this setting to activate this function.
WIDE RANGE:
Select this to deactivate this function when you enjoy wide
dynamic range programme.
TV MODE:
Select this when connecting to a TV. Even soft sound can be
well heard.
NOTES:
● This function has no effect on programmes other than those
recorded in Dolby Digital format.
● The effect of ANORMALB and AWIDE RANGEB may not be
different depending on discs.
8 OUTPUT LEVEL ^ STANDARD / LOW
You can lower the output level of analogue audio to accommodate
the unit to the connected A/V equipment.
STANDARD:
Normally select this setting.
LOW:
The output level of analogue audio is lowered.
Mode Set
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
DVD SET UP LANGUAGE SET (A pg. 20)
AUDIO OUTPUT (A pg. 74)
UTILITY (A pg. 83, 84)
FUNCTION SET UP
VIDEO IN/OUT (
A
pg. 21, 69, 70)
RECORDING SET (A pg. 75)
DISPLAY SET (A pg. 75)
OTHERS (A pg. 76)
INITIAL SET UP
AUTO CH SET (
A
pg. 17, 18, 79)
MANUAL CH SET (A pg. 80)
GUIDE PR (A pg. 78)
CLOCK SET (A pg. 82)
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
(FGDE)
ENTER
SET UP
DVD
Selection Keys
DVD SET UP
FUNCTION SET UP INITIAL SET UP
VIDEO IN/OUT
RECORDING SET
OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SAVE AS LIBRARY
XP MODE REC AUDIO
AUDIO REC
DISPLAY SET
DIRECT REC
INPUT COLOUR SYSTEM
ON
DOLBY DIGITAL
NICAM1/MAIN
NICAM2/SUB
NICAM1/MAIN
MONO
EXIT
OK
SELECT
SET UP
TH-R1R3EU_00.book Page 74 Monday, March 28, 2005 9:23 PM