Filter
Top Products
INITIAL SETTINGS
Page 19Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_05Name.fm]
Masterpage:Left+
19
Results Of Auto Set Up/Preset Download Appearing
On The Front Display Panel
If both Auto Channel Set and
Auto Clock Set have been
performed successfully, the
correct current time is displayed.
Turn on the TV and select an input mode such as EXT1, then make
sure that all necessary stations have been stored in the unit’s
memory by using the PR +/– button(s).
● If station names (ID – A pg. 91) have also been stored in the
unit’s memory, the station name will be displayed at the top right
corner of the TV screen for about 5 seconds when the unit is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 80 and 81.
If Auto Channel Set has
succeeded but Auto Clock Set
has not, APR1B (channel
position) is displayed.
OR
If both Auto Channel Set and Auto Clock Set have failed,
A-- : --B is displayed.
A Turn on the TV and select an input mode such as EXT1, then
make sure that all necessary stations have been stored in the
unit’s memory by using the PR +/– button(s).
● If station names (ID – A pg. 91) have also been stored in the
unit’s memory, the station name will be displayed at the top right
corner of the TV screen for about 5 seconds when the unit is
tuned to a different station.
● If you want to set the tuner manually such as to add or skip
channels, to change channel positions, or to set or change
station names, see pages 80 and 81.
B Perform AClock SetB (A pg. 82).
ATTENTION:
After making sure the cables are connected properly, turn off the
unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen. Perform AAuto
Set UpB (A pg. 17) or APreset DownloadB (A pg. 18) again.
IMPORTANT:
● To check if the Guide Programme numbers have been set
correctly, perform the S
HOWVIEW Timer Programming. (A pg. 49)
● In certain reception conditions, station names may not be stored
correctly, and Auto Guide Programme Number Set may not work
properly. If the Guide Programme numbers are not set properly
when you timer record a TV programme using the S
HOWVIEW
system, the unit will record a TV programme of a different station.
When programming the timer using the S
HOWVIEW system, be
sure to check the desired channel is selected correctly.
(A pg. 49)
● Your unit memorises all detected stations even if reception of
some of them is poor. You can delete those stations with an
unacceptable picture. (A pg. 80, ADelete A ChannelB)
INFORMATION
Language for the on-screen display
The language for the on-screen display will be set automatically
when the Country setting has been made in step 2 of AAuto Set
UpB on page 17 (unless you have selected ABELGIUMB or
ASUISSEB), as shown below.
If you want to change the language setting manually, see AOn-
screen Language SetB (A pg. 20).
Just Clock
Your unit is equipped with the Just Clock function which provides
accurate time keeping through automatic adjustments at regular
intervals, by reading data from a PDC signal. If you want to take
advantage of this function, simply set AJUST CLOCKB to AONB.
(A pg. 82)
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin
SCART cable (A pg. 11), the following functions are available. You
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree
of compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to an input mode such as EXT1
automatically whenever you start playback.
For details, refer to the instruction manual of your TV.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are
watching on your TV. When you use this function, set ADIRECT
RECB to AONB. (A pg. 75)
SUOMI B SUOMI ITALIA B ITALIANO
PORTUGAL
B ENGLISH MAGYARORSZÁG B ENGLISH
DEUTSCHLAND
B DEUTSCH ESPAÑA B ESPAÑOL
POLSKA
B ENGLISH NEDERLAND B NEDERLANDS
NORGE
B NORSK GREECE B ENGLISH
SVERIGE
B SVENSKA OTHER WESTERN B ENGLISH
DANMARK
B DANSK
ÖSTERREICH
B DEUTSCH OTHER EASTERN B ENGLISH
ČESKÁ
REPUBLIKA
B ENGLISH
TH-R1R3EU_00.book Page 19 Monday, March 28, 2005 9:23 PM