JVC XV-THR1 Home Theater System User Manual


 
Masterpage:Right+
Filename [TH-R1R3EU_05Name.fm]
Page 18Monday, 28 March 2005 21:23
INITIAL SETTINGS
18
Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Programme Number Set
If you have connected the unit to your TV via a 21-pin SCART
cable (A pg. 11), the unit will automatically perform Preset
Download instead of the AAuto Set UpB in step 4 on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
1 Press selection keys to select AT-V LINKB, then press ENTER
for confirmation.
T-V LINK setting is
performed.
When T-V LINK
setting is completed,
ASCAN
COMPLETEDB
appears on the TV
screen for about 5
seconds, then the
normal screen
resumes.
ATTENTION:
Preset positions on the front display panel increase from
APR1BAPR3B…; do NOT press any button on the unit or remote
control until the front display panel shows clock time, APR1B or
A- - : - -B as illustrated on page 19.
If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
For details, refer to the instruction manual of your TV.
In areas where no TV station transmits a PDC (Programme
Delivery Control) (A pg. 50) signal, the unit can perform neither
Auto Clock Set nor Auto Guide Programme Number Set.
If there is a power cut, or if you press A or SET UP while
downloading or set up is in progress, it will be interrupted. Be
sure to turn off the unit power once and try again from the
beginning.
Auto Clock Set may not function properly depending on the
reception condition.
On this unit, the characters available for station names (ID) are
A–Z, 0–9, –, Z, + and & (space). Some names of downloaded
stations may differ from those of your TV. (A pg. 81)
Preset Download
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
1 2 3
4 5 6
7 8 9
0
VOL
(FGDE)
ENTER
AUDIO A
PR +/
-
Selection Keys
Perform steps 1 to 3 of AAuto Set UpB (A pg. 17) before
continuing.
After APreset DownloadB is completed, perform AMonitor SetB
(A pg. 21).
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
SET UP
T-V LINK
RETURN
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
T-V LINK
PLEASE WAIT...
OK
SELECT
SET UP
RETURN
TH-R1R3EU_00.book Page 18 Monday, March 28, 2005 9:23 PM