Filter
Top Products
Filename [TH-R1R3EU_05Name.fm]
Masterpage:Left0
Page 17Monday, 28 March 2005 21:23
17
INITIAL SETTINGS
Auto Channel Set/Auto Clock Set/Auto Guide
Programme Number Set
1 Press A on the unit or AUDIO A on the remote control to
turn on the unit. The Country Set display appears on the TV
screen.
2 Press selection keys
to select your country’s
name, then press
ENTER.
NOTES:
● If you have selected
ABELGIUMB or ASUISSEB,
go to step 3.
● If you have selected
AMAGYARORSZÁGB,
AČESKÁ REPUBLIKAB,
APOLSKAB or AOTHER EASTERNB, press ENTER, the Clock Set
screen appears. Set the clock manually (A pg. 82), then go to
step 4.
● If you have selected any other country name, go to step 4.
3 Press selection keys to
select the language of
your choice, then press
ENTER. The AUTO
SET/T-V LINK display
appears on the TV
screen.
4 Press selection keys to
select AAUTO SETB, then
press ENTER.
● Auto Channel Set is
performed.
● When Auto Channel Set
is completed, ASCAN
COMPLETEDB appears
on the TV screen.
ATTENTION:
AAUTOB blinks on the front
display panel; do NOT
press any button on the unit
or remote control until the
front display panel shows
clock time, APR1B or
AcB as illustrated on
page 19.
● When you have
connected the unit to a TV
offering T-V Link via a
fully-wired 21-pin SCART
cable (A pg. 11) and the TV is turned on, the unit automatically
performs the Preset Download (A pg. 18) even if you select
AAUTO SETB for Auto Set Up function.
NOTES:
● In areas where no TV station transmits a PDC (Programme
Delivery Control) (A pg. 50) signal, the unit can perform neither
Auto Clock Set nor Auto Guide Programme Number Set.
● If there is a power cut, or if you press A or SET UP while AAuto
Set UpB is in progress, AAuto Set UpB will be interrupted. Be sure
to turn off the unit power once and try again from step 1.
● Auto Clock Set may not function properly depending on the
reception condition.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by AAuto Set
UpB, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels. (A pg. 80,
AINFORMATIONB)
Auto Set Up
After the A button on the unit (or AUDIO A on the remote
control) is pressed for the first time to turn on the unit
, by simply
selecting your country*, the Auto Set Up function sets the tuner
channels, clock** and Guide Programme numbers automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
**If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN), set the clock manually.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a mains
outlet.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
(FGDE)
ENTER
AUDIO A
1
Selection Keys
INITIAL SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
INITIAL SET UP / COUNTRY SET
EXIT
OK
SELECT
SET UP
ATTENTION:
Once you have performed AAuto Set UpB, even if the unit’s
memory backup has expired, all the stored stations and their
Guide Programme numbers remain in the unit’s memory and the
unit will not perform AAuto Set UpB again. Perform clock set
manually after turning on the unit. (A pg. 82)
If you have moved to a different area, perform each setting as
required.
● TV Tuner setting (A pg. 79)
● Clock setting (A pg. 82)
If a new station starts broadcasting in your area, perform TV
tuner setting. (A pg. 79)
After AAuto Set UpB is completed, perform AMonitor SetB
(A pg. 21). If you need to set the language, refer to ALanguageB
on page 20 before proceeding to perform AMonitor SetB.
INITIAL SET UP
ENGLISH
INITIAL SET UP / LANGUAGE SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
RETURN
DEUTSCH FRANCAIS ITALIANO
ESPAÑOL NEDERLANDS SVENSKA NORSK
SUOMI DANSK
OK
SELECT
SET UP
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
T-V LINK
RETURN
OK
SELECT
SET UP
INITIAL SET UP
AUTO SET
INITIAL SET UP / CHANNEL SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
T-V LINK
AUTO SET
PLEASE WAIT...
CANCEL
RETURN
OK
SELECT
SET UP
TH-R1R3EU_00.book Page 17 Monday, March 28, 2005 9:23 PM