Filter
Top Products
Using the FS-2/2E
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
3 - 6
Part Number: MANL-0927-03
When mounted, your FireWire disk
drive should appear on the computer's
desktop as shown below:
The FireStore formatted disk drive
appears as a FAT32 volume with a PC
label.
NOTE: This is not always the case on
Version 10 of the Macintosh operating
system however.
S
TEP 3: Once you have located your FireWire
disk drive on the desktop, double click
the disk icon to open it up. Once
opened, you will see the following:
Dismounting FireWire Disk Drives
(Macintosh)
Once you have completed working with your disk
drive on a Macintosh computer system, you must
dismount the drive before unplugging it.
Do this as follows:
S
TEP 1: Select the disk drive on the computer's
desktop. It is marked with a PC symbol.
S
TEP 2: Drag the drive into the trash. This
dismounts the particular disk drive.
Creating a Playlist
Use the following procedure to create a simple
playlist on the FS-2/2E.
S
TEP 1: Ensure no playlist is open.
S
TEP 2: TO ADD A CLIP - Play a clip you wish
to add to the playlist. Using the front
panel buttons, press MARK IN and
MARK OUT for the particular portion of
the clip to add to the playlist. Both
buttons will light.
S
TEP 3: Once marked, press the front panel
PLAYLIST button. The MARK IN and
MARK OUT key lights will go out.
S
TEP 4: Navigate to the next clip and again
mark in and out points followed by
pressing PLAYLIST.
S
TEP 5: Repeat steps 2 and 3 to add all desired
clips.
S
TEP 6: Once you have selected all the clips
you wish to add to the playlist, stop
playback and navigate to the
PLAYLIST menu on the FS-2/2E.
S
TEP 7: Select SAVE and name the playlist. (It
is also possible to modify your created
playlist using the PLAYLIST-> EDIT
menu.
S
TEP 8: To playback the playlist, navigate to
PLAY-FROM in the FS-2/2E menu and
select PLAYLISTS. Select the desired
playlist and then exit. The PLAYLIST
button on the front panel will light.
All playback now comes only from the created
playlist.