Filter
Top Products
INTRODUCTION
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
1 - 10
Part Number: MANL-0927-03
STEP 4: Scroll from value to value using the
FORWARD and BACK INDEX
Buttons.
S
TEP 5: Press and to scroll through digits
in the value.
S
TEP 6: Press EXIT to return to the menu
screen.
Regardless of the display, the file
name always remains YYYYMMDD-
HHMMSS.xxx (Year-Month-Date-
Hour-Minute-Second).
Replacing the Power Module
Fuse
The power module of the FS-2/2E contains a
protective fuse.
To replace the fuse do the following:
S
TEP 1: Turn off the FS-2/2E.
S
TEP 2: Locate the power module on the rear of
the unit. It is indicated as “AC In.”
S
TEP 3: Detach the power cord from the power
module.
S
TEP 4: Locate the small recess on the top of
the power module above the power
switch.
S
TEP 5: Use a small tipped standard
screwdriver to pop open the fuse door.
S
TEP 6: Once open, slide the white fuse carrier
out of the unit.
S
TEP 7: Replace the fuse with a 1.6 amp 250V
slow blow fuse.
S
TEP 8: Reassemble the fuse carrier and slide
it back into the unit.
S
TEP 9: Replace the fuse box door.
S
TEP 10: Re-attach the power cord.