Filter
Top Products
FS-2/2E FUNCTIONS
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 22
Part Number: MANL-0927-03
After you have set up RS422 to control the FS-2/2E
using an external RS422 device, press the
REMOTE button on the front panel or select
REMOTE from the Control Mode menu.
Audio Input
In this submenu, you can change the default audio
input linked to a particular video input.
Select the mode to activate it.
Press SEL for the highlighted menu
item to open the sub-menu. In the sub-
menu, the currently highlighted mode
is the current mode after exit.
Press EXIT to return to the menu
screen. These settings are saved on
power down.
Each video input and its available audio inputs
(defaults are underlined) are listed below:
Composite: Analog Balanced Audio
AES/EBU Digital Audio
S-Video (Y/C): Analog Balanced Audio
AES/EBU Digital Audio
Component: Analog Balanced Audio
AES/EBU Digital Audio
SDI: Embedded
Analog Balanced Audio
AES/EBU Digital Audio
DV: Embedded
NOTE: The FS-2E provides the option to select
channels 1 and 2 or 3 and 4 of the embedded audio
of the SDI input stream. This is an FS-2E feature
only.
There is a SETUP->AUDIO INPUT->SDI-
>EMBEDDED submenu that provides the following
options:
CHAN 1&2
CHAN 3&4
Audio In Levels
This menu item allows you to set the audio input
levels for FS-2/2E.
Adjust the audio level between -34.5dB and +4.5dB
in 1.5dB increments.
TC Mode
This submenu allows you to select different
timecode options for use when the FS-2/2E is
recording.
Select the mode.
Press SEL to open the sub-menu.
When you exit the menu, the
highlighted menu item is the current
mode.
Press EXIT to return to the menu
screen. These settings are saved on
power down.
This submenu contains the following selections:
EXT TC Mode - Whatever the
incoming timecode, the FS-2/2E
records it. You can select between
SELECTED INPUT, VITC
REFERENCE, VITC ANALOG, LTC,
EMBEDDED DV, and EMBEDDED
SDI. Select the desired TC source.
Choosing EXT TC mode will clear any
stored timecode value.
COMPOSITE
S-VIDEO
COMPONENT
SDI
EXIT SEL
0.0dB
|----------------------------------x----------------------|
EXIT
EXT TC
REC RUN
REGEN
FREE RUN
EXIT SEL