Filter
Top Products
FS-2/2E FUNCTIONS
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 26
Part Number: MANL-0927-03
If you select CUSTOM, the FS-2/2E looks on disk
drive volume 1 for any clip named “SPLASH.dv”
and always displays the first frame of that clip. You
can name any RawDV clip “Splash.dv” and the first
frame from that clip appears as the default output in
STOP mode.
Audio Correct
This sub-menu allows you to change the AUDIO
CORRECTION setting on the FS-2/2E.
The highlighted state is saved after
exiting.
Press EXIT to return to the menu
screen.
The AUDIO CORRECTION selection is an
advanced feature of the FS-2/2E. You should use
the factory default settings for most operations
(Factory default is MEDIUM).
Audio Correction Mode allows you to alter the
performance of the audio error corrector while
recording. It is useful when recording to the FS-2/2E
from tapes containing dropouts. Error correction
only effects AVI 2, Canopus AVI, Matrox AVI,
QuickTime, AVID OMF, Pinnacle, 24p QuickTime,
and 24p AVI Type 2. It does not effect RawDV or
AVI 1. The selections are:
OFF: No audio correction.
MEDIUM (default): “Normal” clean
tapes played back on a camcorder or
other VTR with clean heads. When
error correction occurs, the audio can
be muted for brief periods of time.
HIGH: For cases where there are
visible picture disturbances and likely
long audio dropouts (1/2 sec and up).
Preferences
This menu allows you to save and restore system
preferences.
When you select ‘SAVE”, you are prompted with the
message “SAVE CURRENT PREFERENCES?”.
Press YES and a file is written to the disk drive
saving the current user settings.
When you select RESTORE the FS-2/2E searches
for a saved user preference on the disk and if found,
restores your PREFERENCES. PREFERENCES
are a snapshot of all settings that can be saved on
the FS-2/2E.
Folder Pref
The FOLDER PREF menu allows you to determine
the folders to which your clips are moved when you
choose to do a ORGANIZE CLIPS from the
UTILITIES menu. This menu contains the following
sections:
SCENE MARK - (default setting) only
marks those clips you explicitly mark
during record or playback.
AUTO MARK - marks all recorded
clips with the last selected FOLDER.
NOTE: These features are most easily used in
conjunction with the optional wired remote control.
This can be ordered at the Focus Enhancements
on-line store: https://www.focusinfo.com/sales/
store/. The part number is ACSS-0019-01.
Analog Out
This screen provides to selections: Composite or
Component
When you select the composite output,
the “Y” output on the rear panel
provides a composite signal.
When you select component out, you
can also select either SMPTE,
AUDIO CORRECT
OFF
MEDIUM
HIGH
EXIT
PREFERENCES
SAVE
RESTORE
EXIT SEL