Filter
Top Products
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 1
Part Number: MANL-0927-03
FS-2/2E FUNCTIONS
CHAPTER 2
FS-2/2E FUNCTIONS
This chapter contains the following sections:
Edit/Utility/Input Buttons
LCD Menu Soft Keys
Transport Control Keys
LCD Display
FS-2/2E Menus and Functions
Edit/Utility/Input Buttons
To the right of the hard disk drive are a bank of 15
buttons as shown below.
The first row contains five buttons that
are Edit functions keys.
The second row consists of five
buttons that are Utility keys.
The third row has five buttons that are
Input buttons.
Edit Function Keys
This section explains the edit function keys.
MARK IN - Mark In Key
Use the MARK IN key to mark a particular frame as
a starting point when creating a clip for a playlist.
Refer to “Playlist Menu” on page 2-15 of this user
guide for more information about Playlists.
NOTE: It is only possible to mark in and out points
during playback.
MARK OUT - Mark Out Key
Use the MARK OUT key to mark a particular frame
as an ending point when creating a clip for a playlist.
NOTE: Once you have selected In and Out points,
press the PLAYLIST key. (The In and Out key lights
will turn off). You are then free to add more clips to
the playlist by again selecting In and Out points.
When finished, go to the PLAYLIST menu under
SETUP.
PLAYLIST – Add to Playlist key
Press this key during stop or play to add a current
clip to the playlist.
Once In and Out points have been selected, press
this key to add selected clips to the playlist.
KEEPER - Keeper Key
By pressing the Keeper key during a recording, you
can mark each clip into the KEEPER folder on disk.
To add all KEEPER clips to the KEEPER folder on
the disk drive, select UTILITIES->ORGANIZE CLIP
from the FS-2/2E menu.
FOLDER - Folder Key
By pressing the Folder key during a recording, you
can mark each clip into particular pre-named
folders on disk (up to 10 folders can be prenamed).
Default names for the folders are 0 through 9. Refer
to “How to Mark Scenes” on page 3-7 of this user
guide to set up Scene Marking folders).
By repeatedly pressing the FOLDER key, you can
scroll though the available folders. You can also
assign clips to folders using the numeric keypad on
the optional remote control units. The current clip
can be marked during recording, playback or in stop
mode. Once selected, the clip is marked for
placement into that particular folder.
To add all marked clips to their respective folders on
the disk drive, select UTILITIES -> ORGANIZE
CLIP from the FS-2/2E menu.
For more information on SCENE MARKING, refer
to “How to Mark Scenes” on page 3-7 of this user
guide.
If the FOLDER key is lit during playback, the
FS-2/2E PLAY FROM mode is set to FOLDER.
MARK IN MARK
OUT
PLAY
LIST
KEEPER FOLDER
OSD HDD LOCK REMOTE E-E
CMPST Y/C CMPNT SDI DV
MARK
IN
MARK
OUT
PLAY
LIST
KEEPER FOLDER