Filter
Top Products
FS-2/2E FUNCTIONS
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
2 - 6
Part Number: MANL-0927-03
NOTE: The FS-2/2E will not accept
NDF TC values in DF TC mode.
AUDIOMETER - Displays left and right
levels in db. The scale indicates -10db,
-4db, and 0db. This display mode is
only available for the FS-2E, or the FS-
2 (with the 2.0 upgrade).
The 2 lines on the menu appear similar
to the following:
-10 -4 0
| | |
R------------------
L-----------------
(7) Timecode or User Bit Value
Displays the timecode or user bit value of display
mode selected as follows:
00;00;00;00 - Drop Frame
00:00:00:00 - Non Drop Frame
(8) Current Disk Volume
Displays the current disk volume in relation to
available space.
(9) Available Space on Volume
Displays the space in time available on the current
volume, for example,
DISK 1 183min - Current Disk time
remaining is 183 minutes
NO DISK - No attached Disk
(10) Folder Display
In record or playback, this displays the particular
folder a clip is in (if applicable). If playing an entire
folder (PLAY FROM menu set to particular folder),
it displays the folder name as follows: [FOLDER].
(11) Soft Key One (MENU) Function Display
Displays the current function related to Soft Key one
(left key on the top row of buttons). You can use this
key for opening the FS-2/2E Menu and also as a
STOP key during a recording.
(12) Soft Key Two (DISP) Function Display
Displays current function of Soft Key two (middle
key on the top row of buttons). This changes the TC
display between COUNTER, REMAINING, DV TC
(NTSC or PAL), USER BIT, and ABSOLUTE when
in record or playback modes. For the FS-2E, or the
FS-2 with the 2.0 upgrade, there is an additional
AUDIOMETER display mode.
(13) Soft Key Three (SHFT) Function Display
Displays current function of Soft Key three (right key
on the top row of buttons).