Extron electronic DVS 304 D Stereo Receiver User Manual


 
Installation and Operation, cont’d
DVS 304 • Installation and Operation
2-4
Rack mounting the DVS 304 A
To mount the DVS 304 A in a rack, do the following:
1. If feet were installed on the bottom of the DVS 304, remove them.
2. Attach the included rack/through-desk mounting brackets
(part #70-077-03) to the unit using eight machine screws supplied with the
mounting kit.
Rack Mount
Bracket
Figure 2-2 — Attach the mounting brackets and install in rack
3. Insert the unit into the rack and align the holes in the mounting brackets with
the holes in the rack. Use four machine screws to attach the brackets to the
rack.