Filter
Top Products
DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL
PAGE 4-4
If you decide to install the satellite dish antenna yourself, we recommend you purchase the Do-It-
Yourself Instillation Kit. It contains many items you will need to complete most installations.
You will need some of the following tools, depending on your installation:
• Electric drill
• Drill bits (1/8-inch,
3/16-inch, 1/2-inch
masonry)
• Carpenter’s level
• Pencil or chalk
• Tape measure
• Wrenches (3/8-inch,
7/16-inch, or
adjustable)
• Hammer
• Hole digging tools
• Wheelbarrow or
concrete mixing box
• Hacksaw
• Sledge hammer
• Flat blade screwdriver
• Phillips screwdriver
Confirm that you have all of the satellite dish antenna kit components.
• Steel reflector (1)
• Mast (1)
• Base plate (1)
• LNB support arm (1)
• LNB (1)
• ¼-inch nuts (5)
• Retainer screw (2)
• Cable clip (1)
• Flat head screws (4)
• ¼-20 x ½-inch
grounding bolt (1)
If you are missing any parts contact the Customer Care Center at 1-800-274-8995.