Filter
Top Products
40
AXIS Q7401 - System Options
About
Here you can find basic information about your video encoder. You can also view third party software licenses.
Resetting to the Factory Default Settings
To reset the video encoder to the original factory default settings, go to the System Options > Maintenance web page (as
described in Maintenance, on page 38) or use the Control button on the side of the video encoder (see Overview, on page 5)
as described below:
Using the Control Button
To reset the video encoder to the factory default settings using the Control Button:
1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Status Indicator changes to green (which may take up to 1 minute), the process is complete and the
video encoder has been reset. The unit now has the default IP address 192.168.0.90
Note:
For other methods of setting the IP address, please refer to the product’s Installation Guide that accompanies the
product, or download a copy from www.axis.com