Filter
Top Products
38
AXIS Q7401 - System Options
UPnP™
The video encoder includes support for UPnP™. UPnP™ is enabled by default, and the video encoder then is automatically
detected by operating systems and clients that support this protocol.
RTP/H.264
These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video
stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For
more information, please see the online help.
Bonjour
The video encoders include support for Bonjour. When enabled, the video encoder is automatically detected by operating
systems and clients that support this.
Storage
The Disk Management window is used to setup and manage local storage. It is used to connect memory cards for recording
video, monitoring a disk's status, enabling automatic cleanup, and preventing a memory card's memory from being
overwritten.
Storage Device
Storage Device is used to identify and monitor the status of the SD card. It shows the size of the SD card and how free space
is available for storage. It is also used to mount and format SD cards for local storage.
Device Settings
Device Settings is used to configure removal of recorded video. Automatic disk cleanup can be enabled and set up according
to a schedule, and an SD card can be locked to prevent storage removal.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described
in Unit connectors, on page 41.
Maintenance
• Restart - the video encoder is restarted without changing any setting.
• Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not reset
are:
• the boot protocol (DHCP or static)
•
the static IP address
• the default router
• the subnet mask
• the system time
• 802.1X settings
• Def
ault - the default button should be used with caution. Pressing this returns the video encoder's settings to the factory
default values (including the IP address).
Upgrade Server - See Upgrading the Firmware, on page 44.