Filter
Top Products
14
AXIS Q7401 - Video & Audio settings
Video & Audio settings
This section describes how to configure the video encoder, and is intended for product Administrators, who have unrestricted
access to all the Setup tools; and Operators, who have access to the settings for Video & Image, Audio, Live View Config, and
Event Configuration.
You can configure the video encoder by clicking Set
up in the top right-hand corner of the Live View page. Click on this
page to access the online help that explains the setup tools.
Video Stream
The video stream settings are separated into 4 different
tabs:
•Image
•Audio
• H.264
•MJPEG
Image
Image Appearance
Use these settings to modify the image resolution and
compressi
on. Setting the compression level affects the
image quality and the amount of bandwidth required, the lower the compression, the higher the image quality with higher
bandwidth requirements. The image can also be mirrored (reversed). See the online help files for more information.
Video Stream
To avoid bandwidth problems on the network, the frame
rate allowed to each viewer can be limited. Select the Unlimited
radio button to allow the highest available frame rate or select the Limited to... radio button and enter a value (1-30) fps in
the field.
Text Overlay Settings
Use these settings to include an text, date, and time as
over
lay. Click for information on available options.
Preview
For a preview of the image before saving, select video
forma
t and Open. When satisfied with the settings,
click Save.
Audio
Enable Audio
Check this box to enable audio in the video stream.
Note:
Audi
o Setup > Systems Options > Audio
Support > Enable audio support must be
selected to enable sound. See Audio Support, on
page 34.
Text,
overlay
date & time