Filter
Top Products
MAX-CSD10 Web Interface
48
MAX-CSE/MAX-CSD10 Operation/Reference Guide
1. From the IP Settings page and in the IP Address section, select whether the IP will be dynamic or
static.
2. If you selected the IP to be static, change the information in the IP Address field, if necessary.
3. If you selected the IP to be static, change the information in the Subnet Mask field, if necessary
4. Change the information in the Gateway field, if necessary.
5. In the DNS Address section, change the information in the Domain Suffix field, if necessary.
6. Change the information in the Primary DNS and Secondary DNS fields, if necessary.
7. To reboot the system after a change, click the Reboot button. Click OK to confirm the reboot or
Cancel to return to the IP Settings page.
8. To save changes without rebooting the system, click Accept. If you wish to keep the original
settings, click Cancel.
User Page
The User page (FIG. 30) allows the user to make remote changes to passwords.
To change the User Login Settings:
1. From the User page, enter your username in the Username field.
2. Enter your new password.
3. Re-enter the password to confirm that this is the correct one.
4. To save your changes, click the Accept button. To keep the current password, click Cancel.
FIG. 30 User Page
User Page Details
• Username The administrator’s registered username.
• New Password The new password to be used with the MAX-CSD10.
• Re-type Password Confirmation of the new password.