Filter
Top Products
MAX-CSE Web Interface
33
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Changing Video and Audio Settings
1.
From the A/V Setup page, select from Composite or S-Video from the Video In radio buttons.
2. Select from NTSC or PAL from the Video Port radio buttons.
3. Enter the appropriate value in the Mic Gain field. Click Set to lock the entry.
4. To save the changes, click the Apply button on the top of the page. To return to the previously saved
settings, click Cancel.
NetLinx Settings Page
The NetLinx Settings page (FIG. 18) is accessed by clicking on the NetLinx button in the Navigation
Bar. This page allows a user (with the proper access rights) to specify which Master is to be used for
communication, query, and firmware updating.
The Encryption fields on a MAX-CSE are not enabled. To establish a connection to a target Master, both
the ICSP Connectivity and Encryption requirements should be disabled from within the Master’s System
Security Details page (FIG. 19).
FIG. 18 NetLinx Settings page
FIG. 19 NetLinx Master UI: System Security Details Page
These options must not be
selected if the MAX unit
is trying to establish a
connection to a target
NetLinx Master.