Filter
Top Products
Video system signal compatibility
The following tables list the projectors’ video system signal compatibility, particularly for signals
delivered over S-Video and Composite video connectors, which the projector adjusts automatically
when you use the aspect ratio commands described in Adjusting projector settings on page 24.
N OTE
The 16:9 command delivers all video modes with black bands along the top and bottom edges of
the screen. The Match Input command might deliver video modes with black bands along the top
and bottom edges of the screen, depending on the input resolution.
SMARTUF75 projector
Video mode Aspect ratio Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Color signal
(MHz)
NTSC 4:3 15.73 29.96 3.58
PAL 4:3 15.62 25 4.43
SECAM 4:3 15.62 25 4.25 (f
ob
)
4.06 (f
or
)
SMARTUF75w projector
Video mode Aspect ratio Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Color signal
(MHz)
NTSC 4:3 15.73 59.94 3.58
PAL 4:3 15.63 50 4.43
SECAM 4:3 15.63 50 4.25 and 4.41
PAL-M 4:3 15.73 59.94 3.58
PAL-N 4:3 15.63 50 3.58
PAL-60 4:3 15.73 59.94 4.43
NTSC 4.43 4:3 15.73 59.94 4.43
Connecting peripheral sources and outputs
Follow these instructions if you have a peripheral device to temporarily connect to your interactive
whiteboard system.
N OTE S
l Measure the distance between the projector and the peripheral device you want to connect.
Make sure each cable is long enough, has plenty of slack and can be placed safely in your
room without presenting a trip hazard.
C HA PTER 5
Integratingother devices
46