Filter
Top Products
72-EN
1 Antenna Extension Cable
2 Digital Output Terminal (Optical)
Use when combining fiber digital input compatible
products.
3 Remote Control Interface Connector
Connect to the remote control interface box.
4 Power Supply Connector
5 DC/DC Converter
• Do not install the converter at a location subjected to water
such as under the floor mat or air conditioner. This may cause
a malfunction.
• Do not bundle the DC/DC converter cable with other audio
cables. Doing so may induce noise into your system.
•Keep the DC/DC converter away from the Antenna cables and
the rear side of the unit, otherwise noise may be generated
when receiving radio broadcast.
6 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's
battery.
7 Fuse Holder (10A)
8 Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare metal
and is securely fastened using the sheet metal screw
provided.
9 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
! Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
" Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect
to the plus side of the car's reverse lamp that lights when
the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
# Display Output Terminal
$ Remote IN/OUT Terminal
% Ai-NET Connector
Connect this to the output or input connector of other
product (CD Changer, Equalizer, etc.) equipped with Ai-
NET.
& Antenna Receptacle
( System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM
position.
• Be sure turn the power off to the unit before changing the
switch position.
) Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
~ Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
+ Audio Interrupt In Lead (Pink/Black)
, Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals
to the IVA-D901.
- Foot Brake Lead (Yellow/Black)
Connect to the vehicle's foot brake lead or brake lamp
lead.
. Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle's
fuse box or another unused power source which provides
(+) 12V only when the ignition is turned on or in the
accessory position.
/ Fuse Holder (10A)
: Right Front (+) Speaker Output Lead (Gray)
; Right Front (–) Speaker Output Lead (Gray/Black)
< Right Rear (–) Speaker Output Lead (Violet/Black)
= Right Rear (+) Speaker Output Lead (Violet)
> Left Rear (+) Speaker Output Lead (Green)
? Left Rear (–) Speaker Output Lead (Green/Black)
@ Left Front (–) Speaker Output Lead (White/Black)
[ Left Front (+) Speaker Output Lead (White)
\ Monitor Extension Cable (Included)
] Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to
this terminal.
^ Rear input/output Terminal
Use when connecting an amplifier or Equalizer.
_ Front input/output Terminal
Use when connecting an amplifier or Equalizer.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from
the car's electrical harness.
•Keep the battery power leads as far away from other leads as
possible.
• Connect the ground lead securely to a bare metal spot (remove
any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away
from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
•Your Alpine dealer knows best about noise prevention
measures so consult your dealer for further information.