55-EN
1 NAV. transmission indicator
The transmission indicator lights for a few seconds when
the mode selector switch is set to “NAV.”.
2 DTR (DETOUR) Button
Automatically recalculates route if a road block or traffic
congestion is encountered.
3 LIST Button
Displays list of the streets currently set for the route. To
return to the guidance mode, press the DISP button.
4 DEL. DEST. Button
Deletes current destination.
5 OK button
Executes numeral input and starts searching.
6 N/H Button
Toggles between North UP and Heading UP orientation.
7 CANC. Button
Cancels current display screen and switches back to
previous screen with menus.
8 SCALE UP/DN Buttons
9 VOICE Button
Initiates vocal instruction for next route maneuver or
repeats last instruction.
! MODE Button
Inputs numerals using the numeric keypad, DEL. and +10
buttons.
After pressing the MODE button, the following buttons will
be pressed while the status indicator is blinking: numerals
(0-9), DEL. and +10.
" MODE Change Switch
Sets this switch to the “NAV.” side to operate a connected
Alpine navigation system.
Operating a separately sold TV monitor
• To operate a separately sold Alpine TV monitor, press the mode
change switch on the rear of the remote control unit. Operate while
the transmission indicator is blinking.
• Included remote control unit operation seal: Apply the seal for the
type of TV monitor you are using to the rear of the remote control
unit.
• Operation may differ or may not be possible for some
products. Also refer to the product’s operating instructions.
(Rear of the Remote Control)
< Button
Performs playback.
Press and hold for at least 2 seconds for slow motion
playback.
= BAND Button
Switches the band of Audio or Disc mode.
> MODE Change Switch
When operating the connected DVD player/DVD changer,
switch to the EXT DVD side.
• Depending on the disc or playback status, certain operations
may not work. In this case, the mark is displayed on the
monitor screen.
Operating the Navigation (sold separately)
"
1
9
8
7
6
5
!
4
3
2