Filter
Top Products
34-EN
DISPLAY Setup
Name External Equipment to be Displayed
When more than one external device is connected, you can name each
(up to 3) as you like.
Setting items: AUX IN 1 to 3 MODE
Setting contents: AUX / VCR / GAME 1,2 / TV
• The selected source name is displayed instead of AUX source
name. When a source is selected, the Function Guide of AUX mode
appears.
• Only AUX IN 3 MODE can be named “TV.” When AUX mode is
selected, “TV” is displayed as the source name and the Function
Guide of TV mode appears.
• Only when an Alpine TV tuner is connected, can you operate the
displayed function guide from this unit.
Setting of the Rear Camera
When the rear camera is connected, rear pictures are output on the
screen.
Setting item: CAMERA IN
Setting contents: OFF/ON
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by pressing V.SEL and selecting
the CAMERA source.
OFF: The rear pictures are not output.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly
connected.
Setting of the External Monitor Output
Set it to ON when you use the rear entertainment function (page 25).
Setting items: MONITOR OUT 1, 2
Setting contents: OFF / ON
ON: By setting the connected external monitor to ON, the
remote control will be usable.
OFF: When either MONITOR OUT 1 or 2 is set to OFF, only
one monitor can be set by the rear enter function.
When both MONITOR OUT 1 and 2 are set to OFF,
R.SEL in the Function Guide displayed in the main
menu cannot be used.
Setting the External Device Interrupt Mode
Setting item: IN-INT MUTE
Setting content: OFF / ON
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D901, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to
use the Alpine KCA-801B, see your authorized Alpine dealer.
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it
manually.
Setting the Interrupt Icon Display
Setting item: IN-INT ICON
Setting content: INT / TEL
The unit can display the icon of an external device, such as a
telephone, whenever a phone call comes in to tell you there is a phone
call.
INT: The INT icon appears on the display.
TEL: When the external device (telephone) sends the
interrupt signal, the telephone icon appears on the
display.
• TEL icon on this setting is not related to TEL Link Operation
(pages 40 - 43).
Optical Digital Input Selection for an External Audio
Processor
Make sure “OPT.OUT” is ON in “Setting the Digital Output” (page
31) before switching this setting.
Setting item: A.PROC TYPE
Setting contents: PXA-H510 / OTHER
OTHER:
When connecting any audio processor via an optical
digital cable except the PXA-H510.
Connect the optical digital input connector with the
connector for the Head unit.
PXA-H510:
When connecting PXA-H510.
Connect the optical digital input connector with the
connector for the DVD.
•Afterwards, set ACC to OFF once, then turn it ON again. The
setting of optical digital input switch is decided.
Rotary encoder
SOURCE/POWER
7
6
2
1
3
4
5