Filter
Top Products
28-EN
Setup
DVD Setup
DVD Setup Operation
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with
the ignition key in the ACC or ON position. To do this, follow
the procedure below.
1. Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. When the parking brake is engaged for the second
time, release the foot brake.
•For automatic transmission vehicles, place the transmission
lever in the Park position.
Now, the locking system for the DVD mode operation has
been released. Engaging the parking brake can reactivate
the DVD mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above
procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure
of “To display the DVD mode screen.”
Before setup operation below, select the DVD PLAYER mode.
If a disc is inserted into this unit, make sure to take it out.
The following steps 1 to 6 are common operations to each
“Setting item” of DVD Setup. Refer to each section for
details.
1 Press SOURCE/POWER.
The main menu is displayed.
2
Press 6 (SETUP).
The Setup mode screen appears.
3
Turn the Rotary encoder to select “DVD,” then
press the Rotary encoder.
The DVD list is displayed.
4
Turn the Rotary encoder to select your desired
setting item.
The screen shows the
∗
Function Guide.
*Displays the function assigned for each button (the Function
buttons).
Setting items:
MENU LANGUAGE ↔ AUDIO LANGUAGE ↔
SUB T. LANGUAGE ↔ COUNTRY CODE ↔ PARENTAL ↔
DIGITAL OUT MODE ↔ OPT. OUT ↔ TV SCREEN
5
Press the Function buttons to switch the setting.
6
Press 7 (RETURN).
The screen returns to the previous one.
•With the DVD screen displayed, pressing and rotating the rotary
encoder will adjust the volume level.
•Immediately after inputting titles or changing the settings of DVD
mode (while the system is inputting the titles or data automatically)
do not turn the ignition key (engine key) to OFF.
Otherwise, a title may not be written, or the settings may not be
changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (The language
setting is not effective on some discs. If not, the default language is
set from the factory.)
• When the settings are changed, the old settings are
overwritten. Make a note of the current settings
before making changes. The settings are not cleared
even when the vehicle’s battery is disconnected.
•To temporarily change the language of the current
disc, either do so from the DVD menu or by using the
operation described in the section “Switching
the audio tracks” (page 18).
• If the disc does not include the selected language, the disc’s default
language is set.
Setting of the Menu Language
Setting item: MENU LANGUAGE
Setting contents: AUTO / ENGLISH / GERMAN/FRENCH /
JAPAN / CODE
Set the language used for the menus (title menu, etc.).
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Setting of the Audio Language
Setting item: AUDIO LANGUAGE
Setting contents: AUTO/ ENGLISH / GERMAN / FRENCH /
JAPAN / CODE
Set the audio language produced from the speakers.
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Rotary encoder
7
SOURCE/POWER
6
2
4
1
3
5