Filter
Top Products
OPERATION MODES OF FRONT PANEL CONTROLS
148 En
If you perform a mode trigger operation using the front panel controls, this unit enters the following mode. In each mode,
you can use the front panel controls as shown below. If no operation is performed for five seconds in each mode, this unit
automatically returns to the default mode.
Available operations in each mode
* In the BT pairing mode, this unit searches for Bluetooth components to be paired. This mode is available only when “DOCK” is
selected as an input source and a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the
DOCK terminal of this unit.
Operation modes of front panel controls
Mode trigger button Mode to enter
—
Default mode
Press CAUDIO SELECT/REC OUT
Audio select mode
Press and hold CAUDIO SELECT/REC OUT
Rec out mode
Press CMENU
GUI menu mode
Press CTONE CONTROL
Tone control/speaker level mode
Press and hold DENTER
BT pairing mode
Mode
CAUDIO
SELECT/REC
OUT
CMENU
CTONE
CONTROL
DENTER
MPROGRAM
selector
Default
to Audio select mode to GUI menu mode
to Tone control/
speaker level mode
—
Select a sound field
programs (page 46)
Audio select
to default mode to GUI menu mode
to Tone control/
speaker level mode
—
Select an audio input
jack (page 43)
Rec out
to default mode to GUI menu mode
to Tone control/
speaker level mode
—
Select a recording
source (page 55)
GUI menu
Left cursor to default mode Right cursor
Confirm the
selection in the GUI
menu (page 84)
Menu up/down
Tone control/
speaker level
to Audio select mode to GUI menu mode
Select a parameter
for adjustment
(page 54)
Select a speaker for
level adjustment
(page 55)
Adjust parameters
BT pairing*
—
to GUI menu mode
(the pairing process
continues)
—
to default mode (the
pairing process
continues)
Select a sound field
program
Note