Filter
Top Products
112 En
You can operate this unit by using a Web browser. You can select the input source and sound field program, browse the
iPod or USB/network contents, select the preset items, and adjust the parameters of this unit by using the graphical user
interface (Web Control Center) that appears in the Web browser. Check the IP address of this unit by using “IP Address”
in “Network” menu (page 102) in advance, and then enter the IP address to the Web browser to access this unit to control
it.
y
• To use this feature, this unit and your PC must be connected properly in the network (page 28).
• We recommend that you use Windows Internet Explorer 6 or 7 that is installed on Windows XP or Windows Vista PC to access this
unit.
• You can select whether this unit accepts the controls by using the Web browser when this unit is in the standby mode (page 102).
• You can register the MAC address of the PCs you want to use to control this unit and limit the PCs that can control this unit by using
the Web browser. You can select that this unit allows the access to this unit by the PCs whose MAC addresses are registered to this unit
or allows the access by any PCs by using “MAC FILTER” in “ADVANCED SETUP” (page 131)
Controlling this unit by using the Web browser (Web Control Center)
Power on/offSelecting the input source
Controlling USB/
Network features
And many other features...Adjusting the system parameters
Web browser
PC
Control