Filter
Top Products
143 En
Troubleshooting
ADDITIONAL
INFORMATION
Status message Cause Remedy
See
page
Please wait
(Starting Server)
This unit is in the middle of waking up
MCX-2000 that has been set to the
standby mode.
Wait for approximately 20 seconds.
—
Connect error
There is a problem with the signal path
from your network to this unit.
Check the connection between this unit and the LAN
port on your router or hub.
28
Make sure your router is properly connected and
turned on. Also, make sure your modem is properly
connected and turned on when you are attempting to
listen to Internet Radio.
28
Disconnected
Your USB storage device or USB portable
audio player has been disconnected from
the USB port of this unit.
Check the connection between this unit and your
USB storage device or USB portable audio player.
—
The PC server or MCX-2000 previously
connected to this unit no longer exists.
Connect this unit to the available PC server or MCX-
2000.
28
No Device
There is a problem with the signal path
from your USB storage device or USB
portable audio player to this unit.
Turn off this unit and reconnect your USB storage
device or USB portable audio player to the USB port
of this unit.
28
Try resetting your USB storage device or USB
portable audio player.
—
Access error
This unit cannot access your USB storage
device or USB portable audio player.
Try another USB storage device or USB portable
audio player.
—
There is a problem with the signal path
from your USB storage device or USB
portable audio player to this unit.
Turn off this unit and reconnect your USB storage
device or USB portable audio player to the USB port
of this unit.
28
Try resetting your USB storage device or USB
portable audio player.
—
Unable to play
This unit cannot play back the songs
currently stored on your PC.
Make sure Windows Media Player 11 or Windows
Media Connect 2.0 is installed on your PC.
—
Check that the songs currently stored on your PC are
playable (MP3, WMA, MPEG-4 AAC, and WAV).
—
Store some other playable music files (MP3, WMA,
MPEG-4 AAC, and WAV) on your PC.
—
The network may be overloaded with
heavy traffic, and playback is interrupted.
Try preparing a network exclusively for use with this
unit to separate it from general network traffic.
—
List updated
The list of the contents stored on your PC
server or MCX-2000 has been updated.
Bookmark ON
The desired Internet Radio station has
been added to the “Bookmarks” list.
Bookmark OFF
The stored Internet Radio station has been
removed from the “Bookmarks” list.
Empty Memory!
No items are assigned to the selected
numeric button.
Assign the desired item to the numeric button.
79
Not found!
This unit cannot find the assigned item for
the selected numeric button.
Connect the USB device that stores the preset item.
—
Turn on the PC or MCX-2000.
—
Try again when the selected Internet Radio is
providing the service.
80
Preset the desired item to the numeric button (1-8) again.
79
USB Overloaded
Over current passes through the connected
USB device.
Turn off this unit and then disconnect the USB
device. If the message appears when you connect the
USB device again, this unit may not compatible with
the USB device.
—