Filter
Top Products
109 En
Saving and recalling the system settings (System Memory)
ADVANCED
OPERATION
3 Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4 Press 9k / n / l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5 Press 9k / n / l / h to select “SAVE” and
then press 9ENTER.
y
• To reset the name, select “RESET” and then press 9ENTER.
• To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6 Press IMENU to turn off the GUI menu.
If you change the language setting (page 107) or 132), names of
the memory settings will be automatically reset.
■ Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2, Zone 3 and Zone 4 parameters
For zone 4, only the input source setting is saved.
If you load the system settings, the settings currently configured
are overwritten. If you do not want to erase the current settings,
save the settings using the System Memory feature in advance.
■ Loading by the
7
SYSTEM MEMORY
buttons
You can recall the system settings stored in “Memory1” to
“Memory4” by pressing the corresponding 7SYSTEM
MEMORY buttons.
Note
Group Parameters Page
Input/HDMI
Out
Audio Select
90
Decoder Mode
90
Input source 42
HDMI OUT SEL
43
Audio Stereo/Surround
85
PURE DIRECT on/off 54
EXTD SUR. setting 54
Adaptive DRC
95
Adaptive DSP Level
95
LFE Level
96
Dynamic Range
96
Tone Control
97
Pure Direct
98
CINEMA DSP 3D mode on/off 52
Volume Volume level
42
SP Config Parametric EQ
96
Configuration
93
Distance
94
Level
94
Information (Auto Setup)
40
Setup Menu (Auto Setup)
35
Video/
Display Set
Analog ` Analog
99
Analog ` HDMI
99
HDMI ` HDMI
99
Processing
99
Short Message
105
Playback Screen
106
Position
106
Wall Paper
106
Others Lipsync
98
Front Panel Display
105
Audio Output
101
Parameter Descriptions Page
Input
Input source
127
Vo l u m e
Volume level
127
Tone Control
Tone control settings
128
Note
Loading the system settings
Note
Group Parameters Page