Filter
Top Products
129 En
Using multi-zone configuration
ADVANCED
OPERATION
Use this feature to play main zone sources in other zones
simultaneously. This feature is useful when you want to
play back main sources as background music in a home
party, etc.
y
You can select the zones covered by the party mode with “Party
Mode Set” (page 103).
1,2,3 ··· In the party mode, this unit distributes the same
sources to the zones which join the party mode.
4 ··· You can also operate the specific zone
separately when this unit is in the party mode.
Set the operation mode selector on the remote
control to FAMP and then press CPARTY to
turn on or off the party mode.
“PARTY MODE ON” or “PARTY MODE OFF” appears
in the front panel display and GUI screen.
While this unit is in the party mode, the corresponding
zone indicators turn on in the front panel display.
y
Input audio signals are mixed down to monaural and output at
the analog ZONE OUT (ZONE 2/ZONE 3) jacks.
• When this unit is in the party mode, audio signals input at the
MULTI CH INPUT jacks cannot be output.
• When this unit is in the party mode, no signal is output at the
DVR OUT, VCR OUT and MD/CD-R OUT jacks.
• When this unit is in the party mode, only the analog audio
signals (same type as the signal input at the main zone) can be
output at the analog ZONE 4 OUT jacks.
Using the party mode
Notes
MASTER
MAIN ZONE
INPUT
ON
OFF
MIC
OPTIMIZER
AUDIO
SELECT
SPEAKERS
AB
YPAO
SILENT CINEMA
PHONES
ON/OFF
PURE DIRECT
VOLUME
MULTI
ZONE
STRAIGHTTUNING MODE
ZONE ON/OFF
MENU
TONE CONTROL
ZONE
CONTROLS
REC OUT/
ZONE 2
MEMORYFM/AM
EDIT
PRESET/TUNING
EFFECTDISPLAY
MAN'L/AUTO
CATEGORY
SEARCH MODE
PUSH ENTER
PROGRAM
R
L
OPTICAL
HDMI IN USB
AUDIO
VIDEO AUX
S VIDEO
VIDEO
ZONE 3ZONE 4
ZONE 2
12
3
4