Filter
Top Products
107 En
Graphical user interface (GUI) menu
ADVANCED
OPERATION
■ Trigger Output (Trigger output)
Use this feature to select the functions of each TRIGGER
OUT jack of this unit.
Trigger Mode (Trigger mode)
Target Zone (Target zone)
This setting is not available when “Trigger Mode” is set to
“Manual”.
Input Level (Input level)
Select the input source and then set the input level applied
to the selected input source.
This setting is available only when “Trigger Mode” is set to
“Source”.
Manual Test (Manual test)
This setting is available only when “Trigger Mode” is set to
“Manual”.
Use this feature to select the language of the menu items
and messages.
Choices:
English (English), (Japanese),
Français (French), Deutsch (German),
Español (Spanish), Русский (Russian)
y
You can also select the display language with the
“LANGUAGE” parameter in “ADVANCED SETUP”
(page 132).
··· The selected language is displayed.
— ··· The selected language is not displayed. The menu
items and messages are displayed in English.
Choice Function
Trigger1
Sets the functions for the TRIGGER OUT 1
jack.
Trigger2
Sets the functions for the TRIGGER OUT 2
jack.
Choice Descriptions
Power
Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected zone is turned on.
Source
Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected input source is selected.
Manual
Select this setting to send the voltage signals
manually.
Note
Choice Target zone
Main
Main zone
Zone2
Zone 2
Zone3
Zone 3
Zone4
Zone 4
All
Main zone, Zone 2, Zone 3 and Zone 4
Note
Choice Descriptions
High
Sends the voltage when the input source is
selected.
Low
Stops sending the voltage when the input source
is selected.
Note
Choice Functions
High
Sends the voltage signals.
Low
Stops sending the voltage signals.
Language
Language GUI menu
Front panel
display
Zone OSD
Русский
(Russian)
—
(Japanese)
——
Other
languages