Filter
Top Products
E-90
ADJUSTING THE LEVELS OF THE EFFECT SPEAKERS
You can adjust the volume level of each effect speaker (center, right rear, rear center, left rear, front effect, and subwoofer) while listening to
a music source.
1
1
Go to the RECEIVER control panel and tap
( or ) to open the PARAMETER
control panel (page 8/8).
2
2
Tap to select the speaker(s) you want to adjust.
Each time you tap
, the selected speaker changes and
appears in the front panel display only as follows:
Note
• Once you tap
, you can also select the speaker(s) to be
adjusted by tapping
or .
3
3
Tap or to adjust the speaker output level.
• The control range for the center, left and right rear or rear
center speakers is from +10 dB to –10 dB.
• The control range for the subwoofer is from –20 dB to 0 dB.
Cautions
• When you adjust the output level with
, the setting you
made with the test tone will be changed.
• You cannot adjust the output level by using on the SET
MENU control panel. However, each time you tap
, the
current level of the each speaker appears on the front panel display
and you can check the speaker level.
• When the speaker output modes for “1A CENTER SP”, “1C
REAR L/R SP”, “1D REAR CT SP” and “1F FRONT EFCT SP”
are set to “NONE”, and “1E LFE/BASS OUT” to “MAIN”, the
output level of those speakers cannot be adjusted because there is
no sound coming from these speakers.
1
1
2
2
3
Center speaker output level
Right rear speaker output level
Rear center speaker output level
Left rear speaker output level
Front effect speakers output level
Subwoofer output level
CENTER 0dB
R SUR. 0dB
REAR CT 0dB
L SUR. 0dB
FRONT 0dB
SWFR 0dB