Filter
Top Products
E-65
ADVANCED
OPERATION
English
SET MENU ITEMS
9 INPUT MODE (initial input mode)
Use this feature to designate the input mode for sources connected to the COAXIAL (OPTICAL) IN jacks when you turn on this unit (see
page __ for details about the input mode).
Choices: AUTO, LAST
Initial setting: AUTO
AUTO: Select this to allow this unit to automatically detect the type of input signal and
select the appropriate input mode.
LAST: Select this to set this unit to automatically select the last input mode used for that
source.
Caution
• Even if “LAST” is selected, the setting for
is not stored in memory.
10 PARAMETER INI (parameter initialization)
Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group,
all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the DSP program that you want to initialize.
The asterisk (*) next to the program number means that the parameter values have been
changed.
Cautions
• You cannot initialize the individual DSP programs within a group separately.
• The parameter values of the DSP programs do not change if you initialize a program
group that does not have the asterisk mark (*).
• When “16 MEMORY GUARD” is set to “ON” (see page __), you cannot initialize any
program groups.
• Once you initialize a DSP program group, you cannot automatically revert to the
previous parameter settings.
11 LFE LEVEL
Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The
LFE signal carries the low-frequency special effect sound which is only added to certain scenes.
Control range (dB): –20 – 0 for both SPEAKER and HEADPHONE
Initial setting: 0 dB for both SPEAKER and HEADPHONE
1
1
Tap or to select the item to be adjusted.
2
2
Tap or to adjust the LFE level.
Note
• Adjust the LFE level according to the capacity of your subwoofer or headphones.
9 INPUT MODE
“AUTO LAST
-/+ : Select
/ : Exit
10 PARAMETER INI
1234
5678
9101112
Press No. Key
11 LFE LEVEL
≥ SPEAKER……………0dB
HEADPHONE………0dB