Filter
Top Products
E-75
ADVANCED
OPERATION
English
REMOTE CONTROL FEATURES
■ Defining brands by searching
You can use the Search mode to find the matching RC codes for your component when your brand is not displayed in the list of brands, or
you selected your brand, but do not know which code set to select.
4
4
Tap .
A scrollable list of brands for the selected component and a
“virtual auto-zooming” mini-keyboard appears.
5
5
Tap .
The remote control automatically searches through all available
brands and code sets to find the matching RC codes for your
component.
6
6
Tap to start sending appropriate commands for
the selected component.
7
7
Tap when the component reacts.
Notes
• Even when the component is responding to the current code
set, it is still advisable to try out other code sets. When your
component responds to more than one code set, install the
most suitable one.
• If you have specified the brand at step 4, the name of the
responding code set is displayed when you tap , so
you know which code set to select from the list after you try
out other code sets.
8
8
Tap to open the first control panel of the
selected component.
9
9
Try out the buttons on the control panels and install
the RC codes following steps 11 to 13 described in
“Defining brands by selecting” on the left page.