Filter
Top Products
E-66
12 DYNAMIC RANGE
Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.
Choices: MAX, STD, MIN
Initial setting: MAX (for both speakers and headphones)
Caution
• Some types of the Dolby Digital software do not support “MIN” for the dynamic range.
If “MIN” is selected to play this type of software, the volume may be extremely
lowered. If this problem occurs, select “MAX” or “STD”.
13 SP DELAY
Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there is sound output from the
center speakers, with a source like Dolby Digital or DTS, etc.
Ideally, the center speaker and the rear center speaker should be the same distance from
the main listening position as the left and right main speakers. However, in most home
situations, the center speaker or the rear center speaker is placed in line with the main
speakers or the rear speakers. By delaying the sound from the center speaker and the rear
center speaker, the apparent distance from the center speaker and the rear center speaker
to the main listening position can be adjusted to make it seem the same as the distance
between the left and right main speaker, and the left and right rear speakers to the listening
position. Adjusting the delay time for the center speaker is especially important for giving
depth to the dialogue.
1
1
Tap or to select “UNIT”.
2
2
Tap or to select the unit to be used for setting.
Select one from “msec”, “meters”, and “feet”.
Notes
• Setting items change depending on the unit chosen.
• When “meters” or “feet” is selected, enter the distance from your listening position
to each speaker.
3
3
Tap or to select the speaker for which the delay is adjusted.
4
4
Tap or to set the delay.
Tap for higher value and for lower value.
SET MENU ITEMS
MAX: Select the “MAX” setting for feature films.
STD: Select the “STD” (Standard) setting for general use.
MIN: Select the “MIN” setting for listening to sources at
extremely low volume levels.
MAX
STD
MIN
MIN
STD
MAX
Dialog level
Output level
Input level
12 DYNAMIC RANGE
≥ SP:“MAX STD MIN
HP:“MAX STD MIN
13 SP DELAY
≥ UNIT…………………feet
MAIN L/R…10.0ft
CENTER………10.0ft
REAR L/R…10.0ft
REAR CT………7.0ft
L
C
C
R
RL RC
RC
RR
Center speaker image
Rear center speaker image