Filter
Top Products
E-62
SET MENU ITEMS
6 CINEMA EQ
Use this feature to match the tonal quality of four groups of speakers: the main and center speaker group, the front effect speakers group, the
rear speakers group, and the rear center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric
equalizer (PEQ). The high-shelving equalizer changes high frequency characteristics, and the parametric equalizer boosts or cuts any selected
frequency. The equalizer can be used for a variety of purposes, such as adjusting the tonal quality of differing types of speakers, adjusting the
tonal quality in different installation environments, or adjusting the source sound to your liking.
1
1
Tap or repeatedly to select one of the speaker groups and tap
or to select “ON”.
2
2
Tap or several times to display the setting screen for the
channel to be set.
There are 4 groups (6A – 6D) to be set.
Caution
• If “OFF” is selected in step 1, the setting screen for that group will not be dis-
played.
3
3
Tap or to select the item to be adjusted.
Select one item at each time from “FRQ”/”GAIN” for “HIGH” and “FRQ”/”GAIN”
for “PEQ”.
4
4
Adjust the value for the item by tapping or .
“FRQ” (frequency) for “HIGH” is to set the turn over frequency and “PEQ” for the
band central frequency. The amplification increases for higher “GAIN” value while
the attenuation increases for lower “GAIN” value.
Notes
• When any change has been made on the initial setting,
*
(asterisk) will be placed in front
of its parameter name.
• CINEMA-EQ does not work when you press STEREO/EFFECT or the right button
(labeled “STEREO”) on the remote control to turn off the effect.
• While “TEST DOLBY SUR.” or “TEST DSP” is being activated, the test tones are
output as described below.
1 6A L,C,R EQ: The test tones are output from the main L/R and center channels.
(When “1A CENTER SP” is set to “NONE”, the test tones are output from the
main L/R only.)
2 6B FRNT EFCT EQ: The test tones are output from the front effect channels.
3 6C REAR L/R EQ: The test tones are output from the rear L/R channels.
4 6D REAR CT EQ: The test tones are output from the rear center channels.
■ 6A L, C, R EQ (main L/center/main R equalizer)
Use this feature to adjust the tonal quality of the main L/R and center channels.
Control range: 1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
Initial setting: 12.7 kHz (HIGH: FRQ, PEQ: FRQ), –3 dB (HIGH: GAIN),
–4 dB (PEQ: GAIN)
6 CINEMA EQ
≥ L,C,R…………………OFF
FRNT EFCT………OFF
REAR L/R…………OFF
REAR CT……………OFF
6A L,C,R EQ
≥ HIGH:FRQ…12.7kHz
GAIN………-3dB
PEQ :FRQ…12.7kHz
GAIN………-4dB