Filter
Top Products
E-67
ADVANCED
OPERATION
English
SET MENU ITEMS
■ Setting by “msec”
Control range: 0 – 5.0 ms (for center), 0 – 30.0 ms (for rear center)
Initial settings: 0 ms (for center), 3.0 ms (for rear center)
■ Setting by “meters”
Control range: 0.15 – 30.48 m (for main L/R, center, rear L/R, rear center)
Initial settings: 3.04 m (for main L/R, center, rear L/R), 2.13 m (for rear center)
■ Setting by “feet”
Control range: 0.5 – 100 ft (for main L/R, center, rear L/R, rear center)
Initial settings: 10.0 ft (for main L/R, center, rear L/R), 7.0 ft (for rear center)
Caution
• No delay will be set if the same distance is set for the main L/R and center, or the rear L/
R and rear center with “meters” or “feet” selected.
14 AUDIO DELAY
Use this feature to adjust the delay time of all channel sounds, when this unit decodes DTS or Dolby Digital signals. Adjusting “AUDIO
DELAY” is especially important for matching the sounds to screen pictures.
Control range: 0 – 160 ms
Initial setting: 0 ms
Note
• This feature is effective when the Dolby Digital, DTS or PCM (with the sampling
frequency lower than 96 kHz) signal is being played. The set value can be used for either
format and applies to all channels.
13 SP DELAY
≥ UNIT…………………msec
CENTER………………0ms
REAR CT………3.0ms
13 SP DELAY
≥ UNIT……………meters
MAIN L/R……3.04m
CENTER…………3.04m
REAR L/R……3.04m
REAR CT………2.13m
13 SP DELAY
≥ UNIT…………………feet
MAIN L/R…10.0ft
CENTER………10.0ft
REAR L/R…10.0ft
REAR CT………7.0ft
14 AUDIO DELAY
0ms