Filter
Top Products
E-53
BASIC OPERATIONS
English
STANDBY
/ON
INPUT MODE
INPUT SELECTOR
VOLUME
SPEAKERS
BASS
SILENT
PHONES
A B
STEREO
PROCESSOR
DIRECT
BASS
EXTENSION
FM/AM
A/B/C/D/E
EFFECT
ON
S VIDEO VIDEO
OFF
LR
PHONO
CD
TUNER
CD–R
MD/TAPE
DVD
SOURCE/REMOTE
D–TV/LD
CABLE
SAT
VCR 1
VCR 2
VCR 3/DVR
VIDEO AUX
PROGRAM
6CH
INPUT
PRESET
/TUNING
EDIT
MEMORY
MAN'L/AUTO FM
TUNING
MODE
AUTO/MAN'L MONO
TREBLE
VIDEO AUX
L AUDIO
OPTICAL
R
PRESET
/TUNING
BALANCE
REC OUT/ZONE 2
213
Presetting stations
■ Automatically presetting stations (for FM stations)
You can use the automatic preset tuning feature to store FM stations. This function enables this unit to automatically tune in to FM stations
with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any
preset station by selecting the preset station number (see page __).
1
1
Press FM/AM to select the FM band.
2
2
Press TUNING MODE (AUTO/MAN’L MONO) so that
the “AUTO” indicator lights up on the front panel
display.
3
3
Press and hold MEMORY (MAN’L/AUTO FM) for more
than 3 seconds.
The preset number, the “MEMORY” and “AUTO” indicators
flash. Then, after about 5 seconds, automatic preset tuning
begins from the frequency currently displayed toward the
higher frequencies.
When automatic preset tuning is completed, the front panel
display shows the frequency of the last preset station.
Notes
• Any stored station data existing under a preset number is cleared
when you store a new station under that preset number.
• When a station data is stored under a preset number, the frequency
and reception band are also stored.
• You can manually replace a preset station with another FM or AM
station by simply following the procedure in the section “Manu-
ally presetting stations” on page __.
• If the number of the received stations does not reach E-8,
automatic preset tuning has automatically stopped after searching
all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you want
to store is weak in signal strength, tune in to it manually in the
monaural mode, and store it by following the procedure in
“Manually presetting stations” on page __.
Automatic preset tuning options
You can select the preset number from which this unit will store FM
stations and/or begin tuning toward lower frequencies. After
pressing MEMORY in step 3:
1. Press A/B/C/D/E and PRESET/TUNING q/w to select the
preset number under which the first station will be stored.
Automatic preset tuning will stop when stations have all been
stored up to E-8.
2. Press PRESET/TUNING EDIT to turn off the colon (:) and then
press PRESET/TUNING q to begin tuning toward lower
frequencies.
Memory back-up
The memory back-up circuit prevents the stored data from being
lost even if this unit is set in the standby mode, the power cord is
disconnected from the AC outlet, or the power supply is
temporarily cut due to power failure. However, if the power is
cut for more than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting station
methods.
FM/AM
FM
Lights up
AUTO
TUNING
MODE
AUTO/MAN'L MONO
MEMORY
MAN'L/AUTO FM
D–TV/LD DVD
CABLE
MD/TAPE
SAT
CD–R
VCR 1 TUNER
VCR 2 CD
VCR3/DVR
PHONO
V–AUX
TUNED
AUTO
DSP
A-1:FM 87.5 MHz
MEMORY
TUNING