Filter
Top Products
E-50
BASIC PLAYBACK
■ Playing the Dolby Digital EX or DTS ES
software
Tap on the RECEIVER control panel to open the DSP
control panel. Then tap
to turn on the Dolby Digital EX or
DTS ES decoder to listen to the Dolby Digital EX and DTS ES
software with a rear center speaker.
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time
is tapped.
AUTO: This mode automatically switches Dolby Digital EX/DTS
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
Discrete 6.1: This mode can be selected when the source with
DTS ES Discrete format has been detected. (The “DISCRETE”
indicator lights up.)
Matrix 6.1: This mode makes 6-channel playback of the input
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The “MATRIX” indicator lights up.)
OFF: Rear center speaker does not work in this mode.
Cautions
• Some 6.1-channel compatible discs do not have the signal (flag)
which this unit can automatically detect. When playing this kind
of discs with 6.1 channel, select “Matrix 6.1”.
• 6.1-channel playback is not possible even if is tapped in the
following cases:
1 when “1C REAR L/R SP” is set to “NONE”
2 when the sound effect is turned off
3 when the source connected to the 6CH INPUT jack is being
played
4 when Dolby Digital KARAOKE source is being played
D–TV/LD DVD
CABLE
MD/TAPE
SAT
CD–R
VCR 1 TUNER
VCR 2 CD
VCR3/DVR
PHONO
V–AUX
DISCRETE
DSP
EX/ES
AUTO:Disc 6.1
VOLUME
LFE
L C R
RL
SP
A
RC RR
MATRIX
MATRIX/DISCRETE indicator
■
Selecting PRO LOGIC, PRO LOGIC or Neo: 6
You can enjoy the 2-channel sources decoded into five or six
discrete channels by selecting PRO LOGIC, PRO LOGIC
or Neo:
6 in the program No. 12.
1
1
Select a 2-channel source and start playback on the
source component.
2
2
Select the decoder.
Tap
or on the DSP control panel repeatedly to open the
third DSP control panel (page 5/8). Then tap
or
repeatedly to select the decoder; PRO LOGIC, PRO
LOGIC
, and Neo: 6.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
Cautions
• Playback using DOLBY PRO LOGIC
and DTS Neo: 6 decoders
is possible only for 2-channel signals.
• PROGRAM q/w on the front panel can be also used to select
these programs.
DOLBY PRO LOGIC decoder
PRO LOGIC
Normal
PRO LOGIC
Enhanced
PRO LOGIC
Movie
PRO LOGIC
Music
Neo:6
Cinema
Neo:6
Music
DOLBY PRO LOGIC
decoder
DTS Neo: 6 decoder