Filter
Top Products
DU6675 DLP Projector - User's Manual
6
Disposal of Old Electric and Electronic Equipment
The symbol on your product or the package represents that the product should not be
treated as the normal household waste when discarded but should be carried to the
recycling location of the waste electric and electronic equipment. The consequence on
the environment and human health due to the incorrect disposal of the product can be
prevented if it can be ensured that the product is properly discarded. Material recycling
is helpful to the protection of natural resources. The symbol is only valid in European
Union. If you want to discard electrical and electronic equipment, contact the governmental
authorities or your dealer for the correct method of disposal.
Important Recycling Instructions
The lamp of the product contains mercury. The product may contain other electronic
wastes and may pose risk if not discarded properly. Abide by the local, state/provincial or
federal laws of recycling or discarding.
For more information, please visit the website and contact Electronic Industries Alliance
(EIA) on WWW.EIAE.ORG. Please visit WWW.LAMPRECYCLE.ORG for the specic
disposal information of lamps.
Installation and Use Notice
1. Read and keep the description properly.
2. Pay attention to all warnings.
3. Follow all guidelines and descriptions.
4. Do not use the equipment near water.
5. Do not install the equipment near the thermal source, such as the heater, radiator,
furnace or other equipment that will generate heat (including the amplier).
6. Use dry clothes to clean only.
7. Do not obstruct any vent. Carry out installation according to the guidelines of the
Manufacturer.
8. Do not destroy the safety protection function of polarized or grounding plugs. A
polarized plug has one wide and one narrow blade. The grounding plug has two blades
and one grounding blade. The wide blade or grounding blade is provided for the safety
concerns. If the plug provided does not match the outlet, contact the electrician to
change the old outlet.
9. Prevent the power cord from being treaded or pressed, especially the power cord on
the plug, outlet and the connection between the power cord and the equipment.
10. Only use the connectors/accessories designated by the Manufacturer.
11. Be careful of moving the trolley/equipment and avoid being hurt due to turning-over
when using the trolley.
12. Unplug the power cord of the equipment if there is a thunderstorm or the equipment
will not be used for a long time.
13. The authorized maintenance personnel is responsible for all maintenance work. The
equipment should be repaired if damaged in any means. (For example, the power cord
or outlet is damaged. Liquids splash to the equipment or foreign objects fall into the
equipment. The equipment is exposed to rain or humidity. The equipment cannot work
functionally or falls.)
14. The +12V trigger only outputs 12V DC trigger signal. Do not connect to other power
input or output. Otherwise, the equipment may be damaged.
15. The packaging materials should be kept properly for the use of transportation.
16. Do not look straight at the lens when the projector is running.