Filter
Top Products
DU6675 DLP Projector - User's Manual
14
Installation and Setup
Precautions for Installation
Place the projector in a horizontal position.
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be
installed in any way other than the desktop and ceiling mount, otherwise lamp life could
decrease dramatically, and may lead to other unpredictable damages.
15˚
15˚
Allow at least 50 cm clearance around the exhaust vent.
Minimum
500mm
Minimum
500mm
Minimum 100mm
Minimum
500mm
Minimum
300mm
Minimum
500mm
• Ensure that the intake vents do not recycle hot air from the exhaust vent.
• When operating the projector in an enclosed space, ensure that the surrounding air
temperature within the enclosure does not exceed operation temperature while the
projector is running, and the air intake and exhaust vents are unobstructed.
• All added enclosures should pass a certied thermal evaluation to ensure that the
projector does not recycle exhaust air, as this may cause the device to shutdown even
if the enclosure temperature is with the acceptable operation temperature range
.
Caution:
Ceiling installation must be done by a qualied professional. Contact your dealer for more information. It is
not recommended you install the projector by yourself.