Filter
Top Products
DU6675 DLP Projector - User's Manual
29
Changing Lamp Power
There are three Lamp power mode options, Normal, Eco and Custom Lamp Power. The
Normal mode is used for every-day standard projection, whereas the Eco mode is used for
saving power and lamp life. Custom Lamp power can be used for ne tuning the brightness
of the projector. To change the Lamp Mode, refer to the following guides.
1. Press MENU on the projector's OSD
control panel or on the remote control
to display the main menu. Use ◄or►
to select SETUP menu.
2. Use ▲or▼ to select Lamp power and
◄or► to set to Normal, Eco mode or
Custom Power Level.
Note:
When the projector is in Eco mode, brightness may be affected.
• Normal Mode: 100% Brightness
• Eco Mode: approx. 80% Brightness
• Custom Power Level: The adjustable range is 100% to 82%(24 steps); this option allows you to adjust
lamp power by step.
Freezing a Picture
The projected image can be frozen for short periods of time by using the remote control.
This feature is useful for capturing still images from movies or freezing an animation at a
particular point. To freeze the projected image, refer to the following guide.
1. Press the FREEZE button on the
remote control once to freeze the
projected image.
2. Resume the projected image, press the
FREEZE button once more.
Blanking the Image
This feature allows you to temporarily stop
projection, the projected image is blanked
once BLANK button on the remote control
is pressed, press once again to resume the
projection.