Filter
Top Products
DU6675 DLP Projector - User's Manual
20
Turning On the Projector
Once the projector is correctly located and the power cable and other connections are in
place, it is important that the projector is powered on correctly in order to avoid damage to
components and unnecessary wear and tear.
Refer to the following guide to power on the projector.
1. Connect the power cable (A). Press the
main power switch to the on ( I ) position
as shown (B), the Power LED lights
orange.
A
B
2. Press the POWER button on the control
panel or ON button on the remote control
once, the Power LED ashes green and
the internal cooling fan starts.
3. After approximately 10 seconds, the
Lamp1 and Lamp2 LEDs light green and
the Power LED ashes more rapidly.
4. Once the power LED is lit a solid green,
the projector is ready for use.
Note:
• If any of the LEDs remain ashing or blink, there may be a problem with the startup. Please refer to the
Troubleshooting section.