Filter
Top Products
DU6675 DLP Projector - User's Manual
47
Subnet: Set the subnet. The input method is same as the IP address.
Gateway: Set the gateway. The input method is same as the IP address.
DHCP: Set DHCP to ON/OFF. When DHCP is set to ON, the DHCP server will assign
an IP address to the projector. The IP address will appear in the IP address window and
you don't need to make any input. Otherwise, the domain does not or cannot assign any
IP address, and 0. 0. 0. 0 is shown on the IP address window.
Apply: Select this button and press Enter. It takes the projector several seconds to
execute the change of the network setting till the following message disappears.
For more information about the network control connection and setting, refer to Remote
Communication Manual.
Lens Control
Select this function to open the Lens Control menu for Zoom, Focus or Shift adjustment.
You can use the Enter button to switch the Zoom/Focus or Shift menu. Use ◄► to adjust
zooming and horizontal shift of the lens, or use ▲▼ to adjust focusing and vertical shift of
the lens.
Test Pattern
The built-in test pattern is provided for installation and adjustment. You can select Test
Pattern on OSD or the TEST PATTERN button on the remote control to display the test
pattern menu, use ◄► or ▲▼ to select desired test pattern