Tascam CC-222MK CD Player User Manual


  Open as PDF
of 36
 
30 TASCAM CC-222MKIII
Dubbing tapes from the CD deck
To record from the internal CD deck:
1 Prepareforrecordingasdescribedabove(loada
tape,settheREVMODE,etc.).
2 LoadthesourceCDdisc(presstheOPEN/
CLOSEkey,putthediscinthetray,recorded
sidedownwards,andclosethetray).
3 UsetheMENUkeytosetthedubbingvolumeto
THRUtobypasstheinputlevelcontrol(see “By-
passingtheinputlevelfordubbing”onpage23).
Ifyouwanttoadjusttheinputvolume,setthe
DUB>VOLmenutoONandusetheleft(tape)IN-
PUTcontroltoadjustthelevelofsignalsfedto
thetapefromtheCDplayer.
NOTE
If you want to record the tracks on the tape in a
different order from those on the disc, use the pro-
grammed playback mode to rearrange the tracks
(see “Program playback” on page 17). Leave the
disc in stop mode when you have finished program-
ming the order.
4 PresstheDUB 2key.
If the tape is in stop mode,thetaperewindsto
thebeginningofthecurrentside.
Atthestartofthetape,recordingstarts,butthe
CDdoesnotstartplaybackforeightseconds.
The Dubindicatorashes.
TheCDstartsplaybackaftertheeightseconds
atthestartofthecassette.TheDub,2indicator
lightssteadily.
If the tape is in record standby mode,recording
startsimmediately,andtheCDstartsplayback
immediately.TheDub,2indicatorlights.
The dubbing stops when playback reaches the end of
the CD, or when the tape reaches the end of its run (one
side in the case of single-sided (Ä) reverse mode, both
sides in the Ë reverse mode), whichever comes first.
Note that if the tape is set to auto-reverse, and the last
item recorded on one side of a tape was not completely
recorded before the tape was reversed, that item will be
automatically repeated.
Also note that when the tape automatically reverses,
eight seconds are used as non-recorded time at the
beginning of the second side (the tape is in record
mode, but the CD does not play back), again to allow
for leader tape at the start of the cassette.
The dubbing process can also be stopped manually with
the STOP key of the cassette deck or the CD deck. All
other transport keys are disabled.
NOTE
Dubbing is not possible if a cassette is not loaded,
or a CD is not loaded. It is not possible if the cas-
7- Cassette operations Cassette operations
Recording operations
Recording pre-recorded tapes, records, or other pub-
lished or broadcast material may infringe copyright
laws. Check before recording.
1 Set the REV MODEswitch.
Ifyouwanttomakeabi-directionalrecording,
settheREV MODEswitchtotheËoräposi-
tion.
Set to the Äpositionifrecordingistobemade
onasinglesideofthetape.
2 Loadarecordablecassette.Checkthatthesafety
tabsonthespineofthecassetteareinplace.If
theyhavebeenbrokenoff,blocktheholeswith
adhesivetape.
3 PresstheINPUT 2 SELkeytoselecteitherliNe2
orDiscasarecordingsource.
When Discisselected,thebuilt-inCDplayer’s
outputisselectedasasource.
When liNe2isselected,theexternalsignalfrom
the LINE 2jacksisselectedasasource.
4 Set the DOLBY NRsystemonoroff.
5 PresstheRECORDkey.Thedeckentersrecord
standbymodeandtheindicatorslightup.
6 Playbackthesource,andadjusttherecording
levelusingthetapedeck’sINPUTlevelcontrolso
thattheloudestsoundmakesthemetersbriey
reacharoundthe “0dB”pointfornormalor
high-positiontapes(recordingisnotpossible
withmetaltapes).
7 PresseitherthePAUSEorPLAYkeytostart
recording.
Tostoprecordingtemporarily,pressthePAUSE
key.Torestartrecording,presseitherthePAUSE
keyorPLAYkeys.IfthePLAYkeywhoseindica-
torisunlitispressed,therecordingdirection
willreverse,andthePLAYkeymustbepressed
againtorestartrecording.
8 Tostoprecording,presstheSTOPkey.
 previous next